CzechQuad´s photos ( my Bashan )
Tunning exhaust
Tunning exhaust
Posted by Jindřich Minář
I think the undo and instalation of a tunning exhaust is so easy for beginers, as well. The only thing to notice is the name of exhaust label – SLK and there was no problem with it.
tool:10 spanner
You will add more power by the instalation of a tunning exhaust and pretty quick acceleration and you will feel the canine appetite of the engine to go into the rotation speed. And the sound is great! See my video. By the way, the original exhaust has the cathalyst which takes the power off.
Investment:about 4500 for an exhaust from SLK
Video Bashan original exhaust:
Video Bashan SLK exhaust:
Change jets for the horsepower improving
Change jets for the horsepower improving
Posted by Jindřich Minář
I would like to give a brief instruction in this section how to get more horse-power from the quad Basnan BS200S-7.
There is 98 basic jet in it and this is not enough for a good power. But I wanted more and that´s why I´ve decidet to change jets for the horsepower improving – I´ve changed the basic jet for Škoda Favorit´s one with a label 125.
tool: number 8 and 10 spanner, cross-head screwdriver.
Take the saddle off and undo the gum cover. The forward screw bolt only. Uncover it towards back wheels. Firsty, take the air filter off with it´s plastic cover. Than loose the cross-head screw on the carburetter and take a bowden choke with a lever system out. ( see picture 1 ). Now undo the screw female with a bowden accelerator and lift the inside of the carburetter. Loose both screw females keeping a carburetter and we can jack it up for turning it for float-chamber loosing.( see picture 3 ).
You can see the carburetter main jet now. Change it for Škoda 125 jet. Install it.
If you add more fuel, there must be more air, as well. I´ve done it by taking the air filter cover off. But what is really neccessary – take a hose for motor air sucking out of a plastic cover and install it into a forward part of air filter. ( see picture 2 ). Lastly, adjust the carboretter. Take the lid off ( see picture 4 ), move a needle on a carburetter slide to the last notch from up. Do it, in the other way, the engine will have bad reaction and there will be a point gap after an acceleration.
Investment: not too much, the jet is gainable in car breaker´s yard.
Imbus = hexagonal key size 8 – 10
